The LED on the GPS receiver blinks while turned on, and the LED colors represents the battery life: Green when 50-100% battery, Orange when 10-50% battery, Red when 0-10% battery. Hold down the Connect button until the LED blinks rapidly to place the GPS connector into pairing mode. When set to Collar, a green LED will stay on. Receiver: When turned on, press the Select button to set the GPS connector to Collar. When set to Phone, a green LED will stay on. The LED colors represents the battery life: Green when 50-100% battery, Orange when 10-50% battery, Red when 0-10% battery.Phone: When turned on, press the Select button to set the GPS connector to Phone. Power: The Power LED blinks every 2 seconds while turned on. A depleted battery requires 3.5 hours to fully charge.ĭo not use more than one splitter cable with a single battery charger. The GPS Connector LED will be green when turned on while charging. The LED will display red while charging and green when the unit is fully charged. The GPS connector functions while being charged. The GPS receiver turns off and cannot be used while charging.When fully charged, detach the cables and plug the rubber caps over the charging ports on the GPS connector and GPS receiver.Plug the charger into a 120-volt outlet.Connect the charger to the GPS connector and GPS receiver using the splitter cable.When the indicator light turns on momentarily, but will not stay on when the Constant button is pushed.When the LED on the transmitter or receiver will not come on.When the PATHFINDER app displays a low battery percentage for the GPS connector or GPS receiver.When the LED is red on the GPS connector or GPS receiver.Fully charge the PATHFINDER if storing for 1 month or longer.Do not charge the PATHFINDER near flammable substances.Only use official Dogtra chargers with the PATHFINDER.The PATHFINDER uses lithium polymer batteries. The PATHFINDER set comes with both parts paired to each other.įully charge the PATHFINDER GPS connector and GPS receiver before the first use. *The GPS Collar pairing mode is used to pair the GPS receiver and the GPS connector. A melody will play when the GPS receiver is in pairing mode. Pairing: To place the GPS receiver into pairing mode, begin with the device turned off and hold down the Power button until the LED blinks rapidly. Power Off: To turn the GPS receiver off, press the Power button until the LED turns off. Power On: To turn the GPS receiver on, press the Power button until the green LED turns on. The GPS connector will now be ready for pairing. Set the GPS connector to Phone to pair the connector to a smartphone.Press and hold down the Connect button until the LED blinks rapidly. Pairing: Use the Select button to set the GPS connector to Collar to pair the connector with the receiver. The Connect button is used to connect the GPS connector to a smartphone and GPS receiver. While turned on, press the Selectbutton to Phone or Collar to pair theconnector to the respective device. The Select button is used to turn theconnector on/off and select a device topair.
0 Comments
Leave a Reply. |